Potholders

I made a bunch of potholders!  These are simple and fun.

I found some lovely fabric prints cut squares in 9" x 9".  I sandwiched padding between the fabric. I used a layer of low pile quilt batting and a layer of Insul-Bright.

Insul-Bright is some pretty neat stuff.  It insulates and prevents heat/cold from passing through. It is a padding that is needle punched with metal fibers.  They explain it on their web site. It looks like glitter infused batting and sounds kind of crunchy. I found it very easy to cut and sew.

I made some bias tape and edged the pot holders and made a hanging loop. I keep my pot holders in a drawer next to the stove. I'm not sure why I think they need a hanging loop, but I added one anyway. It just looks like a potholder if it has a loop!

I made potholders as gifts for some friends and for my oldest daughter. I've received nice comments and thank-yous from all. And my daughter would be honest enough to tell me if she didn't like it! My friends would probably say thank you no matter what they thought, but I believe they said they liked the potholders and they genuinely meant it.

After making and giving out a few sets, I decided that I want a pair for myself. My pair is the set that turned out the worst. Such a simple project but I rushed through my own set of potholders. I used green thread on top and brown in the bobbin, both match the fabric but it made for some interesting stitches. I also got one potholder crooked when I made the quilting stitches during the sandwiching phase. Deciding to make it a quick project, I just trimmed the crooked edges to make one potholder a smaller square. This would have been fine if I would have thought to trim down the other potholder to match. Now they are not the same size which is a bit comical, but in my kitchen it is just fine. Sure gave my husband a good laugh though!

We have been using the new potholders and they are great! Nice and large compared to every other store-bought worn out potholder in my kitchen. And they feel thin enough to usefully grab hold of a pan handle, but no heat is getting through.

My daughter set her potholder ablaze. She said the fabric flamed up and burned to a crisp, but the Insul-bright lining did not. The padding was hot and only burned as embers rather than flames. She is my best product-tester. There you have it, pot-holders that resist heat except when ablaze. Then they just resist flames. The fabric on the other hand didn't stand a chance.

Tooth Fairy Pillow

My daughter lost her first tooth!

Somewhere around here, we have a plastic glow in the dark tooth keeper. Of course, when we need it, we can't find it.

Instead, I made this little tooth pillow. I didn't have a pattern or anything. I googled "tooth fairy pillow" and found a million images of similar things. I had an excited little 5  year old holding her first tooth. We needed a tooth pillow and we needed it now! Insignificant details were cast aside.

It's an asymmetrical tooth shaped pillow with a tiny crooked pocket with unfinished edges. She could not be happier!

Thanksgiving Redondo Skirt

I made a Thanksgiving skirt for my daughter. She loves to spin and twirl!  And I saw this Thanksgiving fabric and knew she'd love it. She loves letters and words; this is just her style!

When it's all laid out you can see how the Redondo pattern works.

And it twirls so nicely!

Microfiber Burp Cloths

My 7 year old edged some microfiber cleaning rags on the serger and we have been decorating them to make them cute enough to use for baby burp wipes.

I used an applique method that is super easy!  The secret is some stuff called "Heat and Bond". It's double sided iron on stickiness. I followed a tutorial by Sew Sara and made little letters to sew on the burp cloths. I think she may have even made burp cloths with the same words on them, I am not sure. But, it should be noted that this isn't my idea. I saw it somewhere.

I printed the words on the computer and traced them onto the fusing paper. Important thing that I didn't do, trace them backward! I had to freehand cut some of them because I printed them the right way which flipped them backward and that just wasn't right.

Once I got all of the tiny cutting done, I ironed them on and sewed around the edges of each letter. Easy Peasy!

When all was said and done, we made almost two dozen burp cloths! Not all of them have an applique on them, some have a ribbon or a decorative trim along the edge.

Christmas Dresses 1997

 My daughters in December 1997.  Weren't they adorable!

I made simple long sleeved dresses with zipper backs for them that year. I used a cheap velvety feeling black fabric, I don't remember what it was. I may have picked it up during Halloween when there is a good variety of dark fabrics on sale. The green is a poly/satin blend.

These were the days before I had a serger, so I made french seams down the sides of the skirts to keep them from fraying.  Even when making a limited use garment, french seams will save your sanity! Fraying seams drive me insane, can you tell?

I added a little ruffle to black socks and a bow for a hairband. Just some finishing touches to pull the whole look together.

Waitress Apron

My daughter recently got a new job waiting tables at an Italian restaurant.  After a couple of shifts, I asked her how it was going and she said, "Oh yeah. Can I have $30?"  What on earth for?  "I need to buy an apron."

Seriously, child? Do you not know who your mother is? I told her to watch the kids for an hour and I'd make one for her.

The apron needed to meet specs. It had to be black, durable, no glitter, no flare, three large pockets and then she held up her hands and said "this big".  She also said "don't forget the ties".  Ok, got it.

I used black twill, or whatever it is called, sort of a denim type fabric. It was 9.99 per yard and I used half a yard. I used one piece of black for the apron, making the bottom layer 18"w x12h" and folded the top layer over to make a 9" high pocket.

I turned over the edge and hemmed the pocket, then sewed lines to separate the pocket layer into thirds. Then I made a bias tape for the ties. I stitched up the sides then finished them with bias tape and added the ties to the waist.

After I finished, I enjoyed the rest of my sewing hour in peace and quiet.  Ahhh, I think I'll tell her that my next project will take two hours!

Toy Potholders and Ovenmitts

My grandson loves to play "chef".  He cooks for his mommy and daddy every day, and part of his play is to wear mommy's oven mitts and use her pot holders.  Santa is bringing him a play kitchen set and some toy foods and dishes.  Grandma is making him some toy potholders!

I cut 5"x5" squares for the hotpads and used the oven mitt pattern from the label on my package of Insul-Brite.  The mitt is small, but I folded it down so that it is even smaller.  (I did not use Insul-Brite in the potholders since he won't actually be handling anything hot)

I quilted the potholders and mitts with fleece. I had some plain blue fleece left over from a project that I made a couple of years ago. I bought the wrong color fleece and this was my "mistake" purchase. I haven't had anything in mind for it in the last two years, so it's perfect to use to pad the potholders. Not too thick, but soft and provides the right feel.

After quilting the pieces, only one more step! Adding the bias tape to the edges. And, here we have my weakness... I really need to get better at doing this!  With all the practice I'm going to get with this pile of potholders (I cut out more!)  I am going to be a pro before I finish them all.

I used the Simplicity Bias Tape Maker to make yards and yards of custom bias tape. Awesome little machine! I just had to try it out before Christmas! I'm not using the machine until everyone is fast asleep for the night so that nobody knows I'm playing with my Christmas present before Christmas. Sneaky, aren't I?

I decided the little kitchen set needed an apron. Yes, an apron!

As you can see, I'm having a great time making the kitchen sets and I'm using a variety of colorful fabrics. I'm going to give one set to my grandson for Christmas, one set to my other grandson's daycare, and one set is going to be a birthday gift for a three-year-old friend. The others will find homes soon, no doubt.

Bunny Backpacks

Here's an old one!  I made these adorable bunny backpacks in April 1999.  The girls loved them!  They were something I saw in a magazine and I cut out the photo and instructions and went home and made them. I remember being thrilled with the fact that they turned out so well!

They are a basic backpack with a zip top. The straps are not adjustable but they were made to fit and worked well.

The face of the backpack is a pink bottom half (which would have been fun to make into a pocket, but I didn't think of it then). The bunny arms are stuffed, they are pink with white tips for paws. The ears are floppy, just hanging from the top seam. And the eyes are large plastic google eyes that I purchased and glued on.  The nose was a little pom-pom and the mouth was hand embroidered.  I had rick-rack to add to the neckline between the bunny face and pink clothing piece.

It's just so cute!

My daughters handed me this photo that they found in an old photo album and asked if I would make bunny backpacks for Easter next year. Awww! My girls!

Yellow Sweater Dress

Any color will do, but my little yellow lover will look cute in this!

I was out shopping and found this large yellow sweater on the clearance rack. I had to buy it for my five  year old!

I started by laying a dress that fits well onto the sweater.

Then I cut out the basic shape using the red dress for a guide for the A-line dress shape and the sleeve points. The length was just right!

Then I sewed the front and back together at the neckline and attached the sleeves to the body, leaving the sides and under the sleeves open.

Next I put the right sides together and sewed from wrist to hem, making sure to keep the armpit intersection nice and matched up.

Flipped it around the right way and that's it! One yellow sweater dress! So sweet and cozy!

I would love to take a photo of her wearing it, but she's got it covered in sidewalk chalk and juice and various other colorful spits and spots. It's been through two wearings already. Next time I'll get a photo of her wearing it. So far, it's holding up rather well!

Mulan's Matchmaker Hanfu

Made It!!!

The girls have been wishing for Princess Mulan dresses for quite some time. I finally found time to get to the fabric store and while I was there, I actually remembered to grab up some pretty blue fabric for the waist band. Really, that's what the big wait was all about. I've had the pink satin and the red trim for quite some time.

I only made one dress because my older girl is growing out of the dress up stage and she would rather wear something normal but themed. I haven't figured out what to do for her yet, but I did buy some Star Wars fabric for when I figure something out. In the meantime, only one hanfu is in order. Which works because Libby's 5th birthday was quickly approaching so the dress could be a gift.  

It only took me a couple of days to make the dress, which would equate to a couple of hours in normal person time. It's been proven many times that I am not functioning in any level of normal, sewing or otherwise. But it should be noted that it was a quick project.

I used a normal looking dress pattern, mainly for the measurements of the shoulders and sleeves and bodice width. The hanfu does not at all resemble the pattern I used, but I am growing out of a need for much of a pattern; I just need the major cutting points and then I can wing the rest of it.

I made the hanfu just like a dress in that it has a top bodice section and a bottom skirt with a zipper up the back. I'm not so sure that is the proper way but I wanted it to have some flair at the bottom and I wasn't so sure a shift or A line cut would have the same effect. Besides, the gathered waistline would be covered by the waist band so it didn't really matter. I also made the skirt ankle length (or so I thought until my kid put it on and I discovered her legs are a lot longer than they used to be!)

I cut the sleeves the right length and then added "bat wings" to the wrist. I also made the tip of the wings longer than the top of the wrist so that it resembled Mulan's long sleeve tips without going overboard. Just a bit of effect for authenticity but not enough that it would be annoying to wear. 

The bodice top gave me some pause. I had to think about how to make it overlap like a robe. I ended up cutting four bodice pieces and then folding them and ironing them down the way I wanted them, trimming off the unwanted half at the diagonal and stitching the two pieces of bodice together at the waist. It has a lining of the same satin, which is why I needed four pieces. Two outer and two for lining. There is probably a hundred easier and more conservative ways to cut the bodice out, but to keep it straight in my mind, that's how I did it. I will have to practice or draw up a little pattern piece.

I used some of the leftover cheap red stuff that I used for the Captain Hook Halloween costume last year to trim the bodice and make the red waist belt. The embroidered blue piece was easy to make into a waistband. I measure the child around the middle and made a rectangle to match. I sewed the red band to the middle of the blue rectangle and added apron ties.

Now I had the pink satin underdress with the red trim on the bodice and the separate blue and red waist band. Done!

There were just a couple of problems. I forgot the red upper skirt and the waist band slid straight down that satin covered kid. It wouldn't stay up.

I added a piece of gathered red to the bottom of the blue waist band and that fixed that issue. Then I tacked the waist band to the dress in the back, front and under the arms to keep it from sliding down. We don't need to spend all day yanking the waist piece up over and over again. Now, it's done!

Princess Mulan's pink hanfu was an awesome birthday gift for my little birthday girl! We hauled it around all day at Disneyland on her big day, but it was too hot to wear satin. Also, Mulan wasn't "home" when we went to the Princess Fantasy Faire. In the evening when it cooled down, she put her hanfu on over her clothes in lieu of a jacket.  It was so cute!  We sure heard a lot of compliments in the couple of hours that she wore it and her little friend instructed me to make one for her and her sister.

Happy Birthday to my little princess!

*** UPDATE ***
11/8/2013

My little Mulan met the real Mulan at Disneyland. Mulan saw her and gasped with excitement! She was like a little princess on Christmas morning when she saw Libby in her Mulan hanfu! Very exciting! Here are the princess twins together:

Jasmine Costumes

I've realized that my sewing skills are pretty rusty. My stitching lines are a little crooked here and there. Ok, fine. They are crooked everywhere. Oh well. It's still fun!

I am using a variety of patterns. The pattern for the pants is a sweatpants pattern, and it is unbelievably high waisted! I'm annoyed about the waste of fabric, I've had to cut both pair of pants down several inches. Princess Jasmine does not wear her pants up around her rib cage. She should, but that's another story.



Since I'm using a light satin and organza, the raw edges are a constant battle to deal with. At first, I just sewed up a quick seam. Oh no, that won't work. I went back and trimmed and tucked the seam in and made a french seam out of it, well, sort of. It's all tucked in and neat now, even if it isn't done correctly. I don't think this backward french seam would win me a ribbon at the county fair.





After I spent some quality time tucking in my seams, I went with french seams the rest of the way through. They look much better, even if the stitching lines look like I was drunk when I was sewing along. I wasn't, I swear!

Honest, Ossifer, I'm not drinking while sewing! Did I do that?

The tops either need a lining or facing. I just hate to use satin facing since it just adds to the fraying problem and doesn't solve anything. I ran out of fabric to cut out linings though, and didn't find a matching color at the store. hmm. I came up with a solution! I zigzagged the seam, tucked it french style, used Fray-Check where I clipped the seams, and top-stitched it all down. Now, you can see the seam right through the organza. No problem! I thought of that!


Princess Jasmine has a lot of gold bling on her outfit, Disneyland Jasmine does, not movie Jasmine. I got some gold trim and will be trimming right over the visible seams. Poof, they are out of sight! I used a loopy decorative ribbon on the armholes and will use the same on the neckline, and I used a pretty beaded ribbon trim on the waist. I did not realize the ribbon was beaded too. I thought it would be quick and easy, just sew the ribbon and the beads will hang. Oh, not so easy! The ribbon is beaded too. I did a "stitch in the ditch" trick that I learned from quilting, worked great.

Well.... it worked great most of the time. Didn't work so well when I missed the ditch.


This is Gracie's top. It isn't done yet, but it's close. I forgot that my child has a big head, and didn't make an allowance for that little problem. I had her try it on and I managed to sqeeze her big melon through the head hole, but just barely. Otherwise, it fit just fine. I will be making a faced placket in the back so she can get her head in and out. Might come in handy. Then I'll finish it off with gold trim around the neckline to cover the visible interior seams.

Redondo Twirly Skirt

This skirt is dangerous!  Dangerous if you can't handle being dizzy, that is. I cannot; therefore, I will not wear one. I will not spin and twirl.  My daughter will. She's five; she can do that.

The first time I saw this skirt, an adorable little girl in my daughter's kindergarten class was wearing it. The next time I saw her, she had another one on. Then another. Her mom sews!  I got to know her mom a bit, but I forgot what she said her name was. That's ok, I just call her "The Redondo Mom" because of the skirt. Well, I don't call her that, I just refer to her silently in my mind as the Redondo Mom. Pretty sure she wouldn't answer me if I actually called her that out loud. Yeah, that might not be so cool.

That was 2 years ago. I've been thinking about that skirt ever since. It's that stinking cute! 

Recently, Redondo mom shared the pattern with me. I was so excited! Like, Christmas morning (after coffee) excited! I traced the pattern, all sizes, then traced another one for a friend of mine who has two little twirly girls, and returned the pattern unharmed by my crazy children.  They'd find it and spill something on it for sure.

The skirt consists of three pieces. One is a rectangle, I totally understand that one. It's the waistband. The other two pieces are completely confusing.

I've been sewing for 21 years now. I've seen so many patterns and could most of the time put them together. This one had me completely baffled. The two skirt pieces look like partial snail shells. I held them and tried to figure out how on earth they make a skirt, and how they fit together, which way is up, which end goes where... yeah, I don't know.

I followed the instructions very carefully. Rechecking every time I put things together. It never made sense. I put the curves together even thought it felt like I was making mistakes. They didn't look like they wanted to line up. But, that's what it said to do.

First, I made five swirls, then put those curly panels together and you'll never guess what! It totally made the cute little skirt! Perfect!!! I'm not sure how that happened when it felt so weird. I really need to practice sewing things that have no straight lines. This was a step out of my comfort zone. Which made it especially satisfying! 

Then I tried out the pattern on the largest size pattern. It was so sweet! But it turned out too long for my little spinner. Hmmmm....  Let's try again.

I now knew which end was up, so I shortened that end. I also cut the pieces a wee bit skinnier and made one more for six panels. Then I cut two types of fabric for the panels so they could alternate. Of course, I cut a couple of pieces backwards and had to recut them. I'm learning.  I sewed them together and next thing you know, skirt #2 was done!  Score! It looked a lot better than the first. In fact, it looked good enough to wear.  We gave it to a little girl for her birthday. 

Then, I made a third. This is fun!  Skirt #3 turned out just  as good as the second one and I love it! More than that, the girls love it!  The largest size fits my smallest girl, so I'm going to have to figure out how to expand the pattern for my bigger girl. She likes to twirl too. 

The skirt doesn't take long to sew. Maybe an hour or two at the most. Of course, it takes me longer because I have to keep three kids from taking all my pins out of my pin cushions, cutting up my fabric scraps, running hotwheels under my sewing table (over the pedals) and keeping the Barbies from climbing all over my ironing board. Slows down the sewing a bit.

I cannot wait to make more Redondo skirts! Thank you, Redondo Mom! or whatever your name is.

Long Swim Trunks

I looked and looked and looked online, but couldn't find any swim trunks that have full leg coverage. There must be boys that have sensitive skin or just want long pair of swim pants, aren't there? Guess I found a niche market that isn't being served.

That's ok. I have a sewing machine and I know how to use it!

I bought two pair of men's swim trunks (because the fabric is cheaper this way and the variety of fabric is more plentiful) and cut them down to size. I also cut out the mesh panties, or underwear as men say. Then I stitched them up like a little pair of pants, added elastic to the inside of the waist where there was once a drawstring. I attached the decorative waist piece and had a wonderful pair of little swim trunk pants! Perfect!

I ended up cutting the back pocket because of where it lies on the trunks, it was in the way. No problem, it just became a smaller back pocket and the raw edges were sewn into the center seam. Not all pockets go right to the middle of the pant, but I'm not going for perfection here, just improvising and the pocket isn't all that noticeable after all. Funny, it's still perfectly useable!  

I think one pair turned out great, and the other pair looks like clown pants. The striped fabric didn't look as good in the small size. Oh well, those will be the back yard run through the sprinklers and get muddy swim trunks.

Ta Da! Swim Trunk Pants!

I'm so happy that I was able to sew something for my grandson to meet his special needs without compromising his fun and he still looks a lot like all the other little boys at the splash pad. Lookout, world, we're going to have a fun summer!

Lightning McQueen Dresses

My latest sewing project was to make Lightning McQueen dresses for the girls.  They just love the movieCars but the merchandise, especially clothing, is all geared to boys.  To be fair, boys don't get much merchandise to choose from when it comes to Cinderella.  There was a prince in that movie too!  That's ok, Mom to the rescue!  Gender-equity for Lightning McQueen!

I decided to keep it simple and avoid buttons and zippers.  I got a  new sundress pattern for Gracie that has a halter style top and an elastic waist. She has a dress this style already that I bought for her at Kohls, so I know it will work well.  I measured her and got it all cut out and sewn up fairly quickly.  Somehow, I still managed to get it too big around the middle.  I'll just add ties, I almost put ties on it to begin with but decided not to.  The pattern does not call for a waistband or ties.  I thought the waistband was cute though, because it broke up the busy fabric print a bit.

 

Libby's dress was easy!  I used the same pattern that I had just used on her Tinkerbell sundress so I knew it fit and I knew how to sew it already.  I made a couple of modifications, very slight.  I shortened up the armhole; I thought it was too big on the Tinkerbell dress.  And, I put the straps at the edge of the yoke instead of moving them in a bit.  With the Tink dress, I moved the straps in to be sure that the dress would stay up on her shoulders, and that worked, but, it made the yoke look goofy with the corners sticking out.  So, I shortened the width of the yoke and put the straps on the edge where they belong.  Ta-Da!  I also trimmed up the dress with some plain red to limit the busyness of the fabric print.  Lightning McQueen comes in some very exciting print!

The dresses turned out so cute! The girls were playing and dancing around me while I sewed waiting for me  to finish.  Very distracting! I decided to move my sewing machine to the wide space in the upstairs hallway. The light there is excellent. I can peek over the edge to see the girls downstairs, and I'm closeby to watch them if they are upstairs. Seemed like a good idea in theory.  But the space is small.

I've been sewing for 18 years.  My first machine was a Mother's Day gift in 1992 from my husband. He had no idea if I would even be interested in the slightest, and we sure didn't have the money for it! But he took a chance and it paid off. I love it!  For the first time ever, I got my finger in the way of the needle.  The needle went right down through the very tip of my middle finger.  It hurt!  I've had worse paper cuts, but in the moment I kind of forgot about that. The girls made sure I got a Dora bandaid and some kisses, ahhhh, all better! 

I also tried to figure out how to work that serger of mine.  I still can't figure it out. I'm about ready to sell it and get a simpler machine. I wanted top-of-the-line so that I would never have to upgrade, but maybe that wasn't such a good idea.  I'm hoping to find a serger class, but so far I haven't had any luck with that either. I think my problem is tension, but maybe that is just the result of another issue. Hard to say.

In only one weekend, I was able to cut and sew the dresses!  Cute new Cars dresses needed an outing, so on Monday we went to Disneyland and California Adventure!  Highlight (one of many highlights) was seeing Lightning McQueen and Mater!